Mandex MARK

ELASTOMERIC FOUNDATION PAINT
PRODUCT CODE: MCP-F603

MANDEX MARK is a one component water-based high solid content elastomeric emulsion which, when applied, forms a damp-proof continuous barrier to the passage of moisture and water. It dries quickly and acts as a protective coating and accelerates curing of cement surfaces, masonry, and brick walls.

MANDEX MARK is refined clay modified with polymer to increase flexibility. It provides superior vapour barrier and excellent damp-proofing& water-proofing. The applied coating permits water vapour to escape while curing. This allows application over damp surfaces and helps prevent blistering. The dried film cures to a tough, durable and flexible finish that can withstand extreme changes in temperature and vibration. The elastic coating provides a continuous film without cracks when applied according to directions for application. The coating will not get damaged when exposed to the ultraviolet rays of the sun.

SPECIAL FEATURES :

APEO FREE
FORMALDEHYDE FREE
LEAD, CADMIUM, MERCURY FREE

KEY BENEFITS :

SUPERIOR HEAT INSULATION PROPERTIES
EXCELLENT ADHESION PROPERTIES.
OUTSTANDING DIRT PICK-UP RESISTANCE.
UNIFORM SMOOTH FINISH.
LOW ODOUR.
LOW VOC.
HIGH BRUSHABILITY AND EXTRA COVERAGE
EXCELLENT SCRUB RESISTANCE

COVERING CAPACITY :

COAT	COVERAGE	DILUTION	FILM THICKNESS
FIRST	130 SQ. /FIT/LITRE	50% WATER	15 MICRONS

TECHNICAL SPECIFICATION :

PHYSICAL APPEARANCE	BUTTERY
FINISH	SMOOTH, SEMI GLOSSY FINISH
PH	9.8
SPECIFIC GRAVITY	1.3GM/CC
USE OF APPLICATOR	BRUSH, ROLLER AND SPRAY
RECOMMENDED THINNER	POTABLE WATER
THINNING RATIO	1:0.5 (ONE LITRE PAINT WITH 500ML WATER)
SURFACE DRYING TIME	45 MINUTES (AT ROOM TEMP:29 DEGREE+2)
HARD DRYING TIME	6 HOURS FROM APPLICATION
RECOATING	NOT REQUIRE
POT LIFE OF MIXED PAINTS	2 HOURS
EXTERIOR DURABILITY	4 YEARS
SPECIFIC AREA OF APPLICATION	EXTERIOR AND INTERIOR USE ONLY
AVAILABILITY	20, 10, 4 & 1 LITRE IN PLASTIC CONTAINER
STORAGE	KEEP AWAY FROM DIRECT SUNLIGHT
SHELF LIFE	18 MONTHS FROM THE DATE OF MANUFACTURE
PRECAUTION	KEEP OUT OF REACH CHILDREN
KEEP IT ON	CLOSE THE CONTAINER LID WHEN NOT IN USE
SHADES AVAILABLE	BLACK, DARK GREY AND BROWN

SURFACE PREPARATIONS :

FOUNDATION : Ensure that the surface is clean and free of moisture. Remove all particles of old paint, grease or other substances that can inhibit adhesion. Repair cracks and holes with good quality crack filler.

APPLICATION : Mix and stir to homogenize before application. Do not apply when rain or frost is forecast within 4 hours. Coating must be cured before exposure to water. (For best results, this coating is recommended to be applied in 2 coats to insure proper coverage.) Allow the applied coating to cure 24-32 hours for best results.

SAFETY MEASUREMENTS : Mandex products does not contain any chemicals that are hazardous to heath. It is purely eco-friendly and low VOC. For additional safety wear face mask and gloves. In case of contact with eyes or face, wash with plenty of water. If irritation persists, seek medical advice.

QUALITY ASSURANCE : Mandex products are manufactured under strict quality control in all areas of production. Great care is exercised from raw material procurement to processing and product packing to ensure consistency and adherence to specifications. The performance of each products is totally guaranteed when used according to our direction for use.