- Have any question?
- +91 97464 69429
- mail@mandex.in
Mandex SINGLE SHOT – X
Mandex SINGLE SHOT - X
(NANO LATEX BASED PRIMER FOR EXTERIOR SURFACES)PRODUCT CODE: MCP-P105
SINGLE SHOT - X is a unique and innovative water-based primer based on Nano Latex. It is specially formulated for priming work of all newly plastered exterior surfaces before the finishing coat. It has excellent adhesion power to almost all surfaces except plastics. Its nano particle size penetrates to the surface, fills all pores and dries quickly to give self-leveled uniform finish.
SINGLE SHOT - X is alkali resistant and has excellent anti-algae and hydrophobic properties, making it the ideal choice for all exterior surfaces for long term protection and to enhance the performance of finish coat. Its excellent coverage and hiding power not only reduces the cost of painting work, but also provide durable finish.
AREA OF APPLICATIONS: Almost all exterior surfaces (except plastic) including cement plastered walls, ceiling, sunshades, terrace, wall drops, wood, concrete, brick work, asbestos and Plaster of Paris surfaces.
INGREDIENTS: Single Shot – X primer contains excellent Nano Latex as a polymer, world class dry-film preservatives, micro fined silicates, hiding pigments, in- can preservatives, adhesion promotion chemicals, flow leveling agents and low VOC compounds, carefully selected to achieve optimum performance of the product.
ADVANTAGES / KEY BENEFITS:
- ECO- FRIENDLY & LOW VOC.
- ADEQUATE COVERING NORMALLY ACHIEVED IN SINGLE COAT. THIS ELIMINATES THE NEED FOR SECOND COAT, THUS SAVING ON PAINTING MATERIAL AND LABOR.
- EASY APPLICATION AND QUICK DRYING.
- EXCELLENT COVERAGE AND HIDING POWER.
- SELF-LEVELING NATURE.
- EXCELLENT DURABILITY.
- ALKALI RESISTANT.
COVERING CAPACITY :
| COAT | COVERAGE | DILUTION | FILM THICKNESS |
| FIRST | 115 SQ. /FIT/LITRE | 50% WATER | 20 MICRONS |
TECHNICAL SPECIFICATION:
| PHYSICAL APPEARANCE | MILKY WHITE & BUTTER FORM |
| FINISH | SMOOTH AND UNIFORM MATT |
| PH | 9.5 |
| SPECIFIC GRAVITY | 1.5GM/CC |
| USE OF APPLICATOR | BRUSH, ROLLER AND SPRAY |
| RECOMMENDED THINNER | POTABLE WATER |
| THINNING RATIO | 1:0.5 (ONE LITRE PAINT WITH 500ML WATER) |
| SURFACE DRYING TIME | 30 MINUTES (AT ROOM TEMP:29 DEGREE+2) |
| HARD DRYING TIME | 4 HOURS FROM APPLICATION |
| RECOATING | NORMALLY NOT REQUIRE |
| POT LIFE OF MIXED PAINTS | 2 HOURS |
| EXTERIOR DURABILITY | 5 YEARS |
| SPECIFIC AREA OF APPLICATION | EXTERIOR AND INTERIOR USE ONLY |
| AVAILABILITY | 20, 10, 4 & 1 LITRE IN PLASTIC CONTAINER |
| STORAGE | STORE IN AIRTIGHT CONTAINER, AWAY FROM DIRECT SUNLIGHT |
| SHELF LIFE | 18 MONTHS FROM THE DATE OF MANUFACTURE |
| PRECAUTION | KEEP OUT OF REACH CHILDREN |
| KEEP IT ON | CLOSE THE CONTAINER LID WHEN NOT IN USE |
ANTI-ALGAL:
Ensure that the surface to be painted is clean and free of moisture. Remove all particles of old paint, grease or other substances. If
surface is uneven, rub down with appropriate grinder and wipe out all dust with brush and cloth. In case of any holes or cracks, fill up
with good quality crack filler and level the surface.
DIRECTION FOR USE : Open the container lid and stir the contents. Transfer the required quantity in to a clean vessel and clean potable water in the ratio 1:0.50 slowly while stirring. Now the product is ready to use. Always use good quality brush or roller. Coating can applied in horizontal or vertical direction. Topcoat can be applied after six hours of this prime coat.
APPLICATION GUIDELINES : Stir the contents well before use | Do not apply on hot and moist surface | Clean all applicators with water only | Keep the container tightly closed when not in use | Store the material in cool and dry place |
SAFETY MEASUREMENTS : Mandex products does not contain any chemicals hazardous to health; it is a purely eco-friendly and low VOC product. However, for additional safety, wear mask and gloves while handling. In case of contact with eyes or face, wash with plenty of water. If irritation persists, seek medical advice.
QUALITY ASSURANCE : Mandex products are manufactured under strict quality control in all areas of production. Great care is exercised from raw material procurement to processing and product packing to ensure consistency and adherence to specifications. The performance of each products is totally guaranteed when used according to our direction for use.
DIRECTION FOR USE : Open the container lid and stir the contents. Transfer the required quantity in to a clean vessel and clean potable water in the ratio 1:0.50 slowly while stirring. Now the product is ready to use. Always use good quality brush or roller. Coating can applied in horizontal or vertical direction. Topcoat can be applied after six hours of this prime coat.
APPLICATION GUIDELINES : Stir the contents well before use | Do not apply on hot and moist surface | Clean all applicators with water only | Keep the container tightly closed when not in use | Store the material in cool and dry place |
SAFETY MEASUREMENTS : Mandex products does not contain any chemicals hazardous to health; it is a purely eco-friendly and low VOC product. However, for additional safety, wear mask and gloves while handling. In case of contact with eyes or face, wash with plenty of water. If irritation persists, seek medical advice.
QUALITY ASSURANCE : Mandex products are manufactured under strict quality control in all areas of production. Great care is exercised from raw material procurement to processing and product packing to ensure consistency and adherence to specifications. The performance of each products is totally guaranteed when used according to our direction for use.