- Have any question?
- +91 97464 69429
- mail@mandex.in
Mandex CUTE
Mandex CUTE
(SNAP EMULSION - INTERIOR) PRODUCT CODE: MCP-F502)MANDEX CUTE is a structured Nano polymer based interior emulsion, specially formulated for all types of interior surfaces. It has excellent adhesion power to almost all surfaces (except plastic). Its Nano particles penetrate into pores on the surface and give uniform smooth and semi-gloss finish.
MANDEX CUTE is composed of 100% Nano acrylic polymer, micronized minerals, high opaque pigments, special additives to provide stain-free, hydrophobic and acid- alkali resistant coating, in-can and dry film preservatives and rheology modifier. Contains PTPE (Teflon) and silicon for optimum performance.
AREA OF APPLICATIONS : Cement plastered surfaces, concrete, masonry, brick, gypsum, asbestos and partition board.
SPECIFICATIONS :
ADVANTAGES / KEY BENEFITS :
MANDEX CUTE is composed of 100% Nano acrylic polymer, micronized minerals, high opaque pigments, special additives to provide stain-free, hydrophobic and acid- alkali resistant coating, in-can and dry film preservatives and rheology modifier. Contains PTPE (Teflon) and silicon for optimum performance.
AREA OF APPLICATIONS : Cement plastered surfaces, concrete, masonry, brick, gypsum, asbestos and partition board.
SPECIFICATIONS :
- APEO FREE
- FORMALDEHYDE FREE
- LEAD, CADMIUM, MERCURY FREE
ADVANTAGES / KEY BENEFITS :
- SUPERIOR HEAT INSULATION PROPERTIES
- EXCELLENT ADHESION PROPERTIES.
- OUTSTANDING DIRT PICK-UP RESISTANCE.
- UNIFORM SMOOTH FINISH.
- LOW ODOUR.
- LOW VOC.
- HIGH BRUSHABILITY AND EXTRA COVERAGE
- EXCELLENT SCRUB RESISTANCE
COVERING CAPACITY :
| COAT | COVERAGE | DILUTION | FILM THICKNESS |
| FIRST | 110 SQ. /FIT/LITRE | 40% WATER | 15 MICRONS |
TECHNICAL SPECIFICATION :
| PHYSICAL APPEARANCE | BRILLANT WHITE, BUTTERY |
| FINISH | UNIFORM, SMOOTH, SEMI-GLOSSY |
| PH | 9.5 |
| SPECIFIC GRAVITY | 1.3GM/CC |
| USE OF APPLICATOR | BRUSH, ROLLER AND SPRAY |
| RECOMMENDED THINNER | POTABLE WATER |
| THINNING RATIO | 1:0.4 (ONE LITRE PAINT WITH 400ML WATER) |
| SURFACE DRYING TIME | 45 MINUTES (AT ROOM TEMP:29 DEGREE+2) |
| HARD DRYING TIME | 6 HOURS FROM APPLICATION |
| RECOATING | AFTER 6 HOURS |
| POT LIFE OF MIXED PAINTS | 1.5 HOURS |
| EXTERIOR DURABILITY | 3 YEARS |
| SPECIFIC AREA OF APPLICATION | INTERIOR USE ONLY |
| AVAILABILITY | 20, 10, 4 & 1 LITRE IN PLASTIC CONTAINER |
| STORAGE | KEEP AWAY FROM DIRECT SUNLIGHT |
| SHELF LIFE | 18 MONTHS FROM THE DATE OF MANUFACTURE |
| PRECAUTION | KEEP OUT OF REACH CHILDREN |
| KEEP IT ON | CLOSE THE CONTAINER LID WHEN NOT IN USE |
SURFACE PREPERATIONS :
Ensure that the surface to be painted is clean and free of moisture. Remove all particles of old paint, grease or other substances. If surface is uneven, rub down with appropriate grinder and wipe out all dust with brush and cloth. In case of any holes or cracks, fill up with good quality crack filler and level the surface.
DIRECTION FOR USE : Open the container lid and stir the contents. Transfer the required quantity in to a clean vessel and clean potable water in the ratio 1:0.40 slowly while stirring. Now the product is ready to use. Always use good quality brush or roller. Coating can applied in horizontal or vertical direction. Topcoat can be applied after six hours of the base coat.
APPLICATION GUIDELINES : Stir the contents well before use | Do not apply on hot and moist surface | Clean all applicators with water only | Keep the container tightly closed when not in use | Store the material in cool and dry place | Store the material away from the reach of children
SAFETY MEASUREMENTS : Mandex products does not contain any chemicals hazardous to health; it is a purely eco-friendly and low VOC product. However, for additional safety, wear mask and gloves while handling. In case of contact with eyes or face, wash with plenty of water. If irritation persists, seek medical advice.
QUALITY ASSURANCE : Mandex products are manufactured under strict quality control in all areas of production. Great care is exercised from raw material procurement to processing and product packing to ensure consistency and adherence to specifications. The performance of each products is totally guaranteed when used according to our direction for use.
DIRECTION FOR USE : Open the container lid and stir the contents. Transfer the required quantity in to a clean vessel and clean potable water in the ratio 1:0.40 slowly while stirring. Now the product is ready to use. Always use good quality brush or roller. Coating can applied in horizontal or vertical direction. Topcoat can be applied after six hours of the base coat.
APPLICATION GUIDELINES : Stir the contents well before use | Do not apply on hot and moist surface | Clean all applicators with water only | Keep the container tightly closed when not in use | Store the material in cool and dry place | Store the material away from the reach of children
SAFETY MEASUREMENTS : Mandex products does not contain any chemicals hazardous to health; it is a purely eco-friendly and low VOC product. However, for additional safety, wear mask and gloves while handling. In case of contact with eyes or face, wash with plenty of water. If irritation persists, seek medical advice.
QUALITY ASSURANCE : Mandex products are manufactured under strict quality control in all areas of production. Great care is exercised from raw material procurement to processing and product packing to ensure consistency and adherence to specifications. The performance of each products is totally guaranteed when used according to our direction for use.